92-160 | IR Repeater Kit, 6 Port Distribution System with Single Port Gain Control
IR connecting hub with a wired receiver that terminates to a (3.5mm stereo plug). A terminal block is also provided to support wired type receiver connections if needed. The 92-160 is designed to simplify the connection of IR receivers and emitters for IR signal distribution. The 92-160 has the ability to send IR signals to 6-sources using a single emitter or up to 12 or more sources if double or triple IR emitters are used. Only port 6 provides a gain control for adjusting IR emitter signal strength. Three colored L.E.D indicators are provide on the distribution block that show power (RED L.E.D.), IR Signal (Blue L.E.D.) and IR Status (Green L.E.D.). If using more than one receiver on a distribution block isolation diodes will be required, please click on the resources tab and select the multiple receivers application note under Application notes for a multiple Receiver connectivity diagram.
IR Emitter Shield Cover: 92-150
Flashing IR Emitters: 92-152
IR Amplified Distribution Block: 92-176
Labor saving-problem solving solderless connectors, stop cutting off IR emitter or IR receivers 3.5mm plugs, use Calrad part numbers 30-489T and 30-295-T solderless connectors for easy in the field cable termination.
30-489T (Male) 3.5mm Stereo plug to 3 position terminal block (Tip, Ring, Sleeve): 30-489T
30-295-T (Female) 3.5mm Stereo Jack to 3 position terminal block (Tip, Ring, Sleeve): 30-295-T
1. Some set top boxes, AV equipment may not respond to standard flashing emitters, use a non-flashing IR-Ultraviolet emitter to solve the issue, Calrad 92-152-NF
Send signals to 6 or more emitters
IR Emitter gain control. (Port 6 only)
Detachable IR Receiver input connector
Power, Ground, Status and Signal
IR Receiver input jack .125" (3.5mm)
(Blue) IR Signal Confirmation LED
(Red) Power LED
(Green) Status Confirmation L.E.D.
Sleek thin receiver design
Includes: 1 x Distribution Block, 1 x Surface Mount Receiver, 3 x IR Emitters, 1 x 12Vdc, 300ma Power Supply (Positive Center)
2.1mm Coax Jacks: 12Vdc Power, Status+12Vdc Input
IR Frequency: (34-60Khz)
IR Emitter gain control: (port 6 only)
(6) Ports: 0.125" (3.5mm) Mono IR Emitter outputs
(1) IR Receiver connectors: Detachable: 4-conductor phoenix plug, 3.5mm stereo IR Receiver Input jack
Dimensions: IR Receiver: 1.77” (L) x 0.56” (W) x 0.52" (H)
Dimensions, Distribution Block: 1.95" (L) x 2.25" (W) x 0.98" (H)
Distribution Block Weight: 6 oz.