Digital Audio Balun Over UTP Cat5e, Cat6, 900 ft.

40-DAB-1 | Digital Audio Balun Over UTP Cat5e, Cat6, 900 ft.
The Calrad 40-DAB-1 digital balun system provides a simple solution for optical toslink or digital coaxial signals to travel over long distances using standard UTP Cat5e, Cat6 cabling. Supports cross conversion from transmitter to the receiver, the input on the transmitter can be toslink and the output on the receiver can be coaxial or vise versa. Perfect for smart TV applications where digital optical toslink connectivity to stereo A\V receivers are required over longer distances extending the typical length restrictions of standard toslink optical cables. To convert any digital audio signal to analog stereo, use Calrads 40-DACD-D converter. Powered is only required at the transmitter side. Signal transmission is in real time with no delay or signal latency issues.

Technical Note: The RJ45 Connectivity between Receiver and Transmitter only uses the Orange pair for signal delivery. So only one pair of a Cat5e or Cat6 is necessary for signal delivery, the other 3 pairs are not used.

40-DAC-D, Optical To Analog Audio Converter with Digital Dolby Decoding: 40-DAC-D



Specifications

Audio Support: Dolby/DB HD, the DTS HD, LPCM/LPCM, (up to 5.1CH), LPCM/LPCM, (up to 5.1CH),2CH Sampling Rate: 32, 44.1, 48, 96Khz

Signal Distance: UTP Cat5e, Cat6 (900 ft.). Note! Quality of cable will effect overall distance

UTP-RJ45 Jacks: 1 x Transmitter, 1 x Receiver, Differential Amplifiers with UTP Balanced Signal Delivery Transmission

Audio Jacks: Transmitter-Receiver (1 x Toslink Optical, 1 x Coaxial RCA)

Red Power L.E.D. Indicators: 1 x Transmitter, 1 x Receiver

DC Power: 5Vdc, 1 Amp (Required only at the Transmitter), DC Power Jack: 2.1mm

Size (Transmitter, Receiver): L-2.67" x W-1.85" x H-0.81"

Color: Black