HDMI Emulator - EDID/CEC Selector

40-EDID | Calrad's 40-EDID HDMI Emulator. Save the EDID data from your HDTV source or display. Computers and HDTV video sources sometimes lose the EDID information, the electronic identification of a display which communicates it's ability to render resolutions and frequencies or to deliver a video signal at all. When displays are switched away or disconnected and then reconnected, the EDID data can be lost and the computer or HD video source device can lose the ability to output video and display a proper image.



(1): The enter button is used after making a selection for Audio, Deep Color, Video Resolution.

(2): The front panel L.E.D. indicators show settings for Audio, Deep Color, Video Resolution setting.

(3): Buttons for setting Audio, Deep Color, Video Resolution.

(4): 3 position switch for CEC connectivity.

• ON: Enable CEC pass-through which allows direct CECcommunication between source and display.

• OFF: Disable the CEC communication between source anddisplay.

• SYS.RST: Switch to SYS.RST will immediately reset the inputselection of the connected display to its first HDMI port.Afterward, the same reset will be done repeatedly for every 8~10minutes. Normal CEC communication is disabled in the SYS.RSTmode.

(5): EDID Setting

• TV: Pass the EDID of the connected display to the source devicedirectly without any adjustment.

• SET: Send the embedded EDID (with user customizedmodifications) to the source device. This mode turns on thefunction of Enter, Audio, Deep Color, and Resolution buttons onthe front panel.

(6): Button for Power On\Off

Specifications:

Frequency Bandwidth: 2.25 Gbps (Single Link)

Video Resolutions: XGA, SXGA, UXGA, 720p, 1080i, 1080p

Compliant with HDMI High Speed and DVI 1.0 standards.

Serial data rate at up to 2.25Gbps, capable of supporting the following digital videoformats in Deep Color Mode at up to 36 bits (12 bits/color)

Supports HD audio-Dolby Digital TrueHD and DTS-HD

Embedded EDID

Built-in CEC support with compliant CEC PHY

HDMI cable distance testing showed that with 1080p 8bit or 12bit resolution the input/ output can be up to 10/15 meters away.

Supports DVI source/display by using an HDMI/DVI adaptor cable

Users can choose the EDID source from either the TV or splitter

Supports CEC bypass or set the device manually to HDMI

Deep Color Support: 8/10/12 bit

Input/Output Jacks: 19 Pin HDMI Female

Power Supply: 5Vdc, 1.2 Amps

Size: 4.9" (L) x 3.6" (W) x 1.2" (H)

Color: Silver

Weight: 250g